8-807 / Forged Alloy Anchor shackle
Shackle
Description
¡´Shackles are Type Approved by DNV & SGS. ¡´Shackles are forged alloy steel with alloy pin. ¡´Size and Working Load Limit permanently shown on each shackle. ¡´All shackles with Batch Code which links to Test Certificate and quality traceability. ¡´100% magnaflux crack detection during manufacturing. ¡´20,000 cycle fatigue rated to 1.5 times Working Load Limit. ¡¹ Minimum Ultimate Load is 5 times the Working Load Limit. Maximun Proof Load is 2 times the W orking Load Limit.
Specification
Item No.

Nominal Size

 Working Load Limit Dimensions (mm) N.W.

mm

 tonnes* A B D E G H W Kg

8-807-08

 8 1.2 31 8 9.5 21 19 54 12 0.1
8-807-10 10 2 36 10 11 26 23 65 16 0.1
8-807-11 11 2.7 43 11 13 30 27 75 19 0.2
8-807-13 13 3.3 47 13 16 33 30 85 20 0.3
8-807-16 16 5 61 16 19 43 39 107 27 0.6
8-807-19 19 7 72 19 22 50 46 126 33 1.0
8-807-22 22 9.5 86 22 26 58 53 148 38 1.5
8-807-26 26 12.5 96 26 28 68 60 166 44 2.3
8-807-28 28 15 111 28 32 74 68 190 46 3.2
8-807-32 32 18 121 32 36 84 76 210 54 4.4
8-807-36 36 21 134 36 38 92 84 232 59 6.0

 

Item No.

Nominal Size

 Working Load Limit Dimensions (inch) N.W.

inch

 tonnes* A B D E G H W lbs

8-807-08

 5/16 1.2 1.22 0.31 0.37 0.83 0.75 2.13 0.47 0.2
8-807-10 3/8 2 1.42 0.39 0.43 1.02 0.91 2.56 0.63 0.2
8-807-11 7/16 2.7 1.70 0.43 0.51 1.18 1.06 2.95 0.75 0.4
8-807-13 1/2 3.3 1.85 0.52 0.63 1.30 1.18 3.34 0.79 0.7
8-807-16 5/8 5 2.40 0.63 0.75 1.77 1.53 4.21 1.06 1.3
8-807-19 3/4 7 2.83 0.75 0.87 1.97 1.81 4.96 1.30 2.2
8-807-22 7/8 9.5 3.39 0.87 1.02 2.28 2.09 5.82 1.50 3.3
8-807-26 1 12.5 3.78 1.02 1.10 2.68 2.36 6.53 1.73 5.1
8-807-28 1 1/8 15 4.37 1.10 1.26 2.91 2.68 7.48 1.81 7.0
8-807-32 1 1/4 18 4.76 1.26 1.42 3.22 2.99 8.26 2.12 9.7
8-807-36 1 3/8 21 5.28 1.42 1.50 3.62 3.31 9.13 2.32 13.2

Back